The EIKI C602S 3LCD Short Throw Laser Golf Simulator Projector is built for simulator bays where the projector has to sit close to the impact screen. EIKI rates it at 6,000 center lumens with 80% uniformity and a 5,000,000:1 contrast ratio, on native WUXGA (1920x1200) resolution using 0.64 inch inorganic 3LCD panels, so a simulated course holds its brightness and color depth even in a room with ambient light.
A 20,000 hour laser light source replaces the lamp entirely, which removes lamp changes from the maintenance schedule and holds brightness far longer than a lamp does over a heavy duty cycle. The short throw lens covers a 0.679 to 0.82:1 throw ratio with manual zoom and focus, and vertical manual lens shift of up to 50%, keystone correction at 30 degrees vertical and horizontal, and pincushion, barrel and 6 point geometric correction make it possible to square the image to a screen from a ceiling mount set close to it.
The C602S accepts 4K (3840x2160 at 60Hz) video input over HDMI and applies 10 bit color processing to it. Connectivity covers 2 HDMI inputs, a Dsub15 computer input, USB-A and USB-B and mini stereo audio, with Dsub15, HDMI and mini stereo outputs for passing signal on. A built in 16 watt amplifier and speaker system handles simulator audio, and wired LAN monitoring and control with Crestron RoomView and AMX Device Discovery compatibility suits a commercial installation.
6,000 center lumens with 80% uniformity
5,000,000:1 contrast ratio
20,000 hour laser light source
Native WUXGA 1920x1200 resolution, 16:10 aspect ratio
0.64 inch inorganic 3LCD panels
10 bit color processing
Accepts 4K (3840x2160 at 60Hz) video input via HDMI
Short throw 0.679 to 0.82:1 lens with manual zoom and focus
EIKI lists the following in the box with the C602S:
Quick Start Guide
HDMI cable
Detachable power cord
Remote control
Optional accessories EIKI offers for this projector: replacement filter, ceiling mount, ceiling post and plate.
Short Throw Laser Brightness
The EIKI C602S 3LCD Short Throw Laser Golf Simulator Projector is rated at 6,000 center lumens with 80% uniformity and a 5,000,000:1 contrast ratio, so a simulated course stays bright and readable on an impact screen even with ambient light in the room. Its 20,000 hour laser light source means there is no lamp to replace.
Native WUXGA (1920x1200) resolution on 0.64 inch inorganic 3LCD panels, paired with 10 bit color processing, gives fairways, greens and shot data the detail and color depth that make a simulator round feel real.
A 0.679 to 0.82:1 short throw lens with manual zoom and focus, vertical manual lens shift up to 50%, 30 degree keystone correction and 6 point geometric correction let the C602S square its image to a screen from a ceiling mount set close to it. Wired LAN monitoring and control with Crestron RoomView and AMX Device Discovery compatibility, plus a built in 16 watt speaker, round out the setup.
The C602S short throw lens covers a 0.68 to 0.82:1 throw ratio, so the lens sits 0.68 to 0.82 times the width of the projected image away from the screen, anywhere from 1.4 to 17.4 feet across its full range. Using EIKI's own lens calculator, an 8 foot tall image, which is 12.8 feet wide at the projector's native 16:10 shape, puts the lens roughly 8.6 to 10.49 feet from the screen. EIKI notes its calculations carry a margin of about plus or minus 3.5%, so our team is happy to confirm the exact position for your space before you mount it.
Our team recommends a ceiling mount for the C602S. Floor mounted golf simulator projectors are typically fixed 0.50:1 short throw models, and at the C602S throw ratio a floor unit would usually land where the golfer needs to stand. A ceiling mount set close to the screen keeps it out of the swing path.
No. The C602S uses a blue laser and phosphor light source rated by EIKI at an estimated 20,000 hours, so there is no lamp to replace. Routine maintenance is cleaning the side accessed air filter.
Yes. EIKI states the C602S displays 4:3, 16:9 and 16:10 aspect ratios. For a 4:3 screen, size the throw from your screen height rather than its width, and use the vertical manual lens shift of up to 50% plus keystone and 6 point geometric correction to square the image to the screen.
Yes. EIKI states the C602S supports 4K (3840x2160 at 60Hz) video input via HDMI and displays it at its native WUXGA (1920x1200) resolution. Analog and digital video standards are supported up to 1080p.
EIKI rates the fan noise at 29 dB in Eco mode and 39 dB in Normal mode.
EIKI rates the C602S for up to 360° installation, with Normal, Reversed and Inverted image orientation settings.
This product is covered by EIKI's limited warranty to the original end use customer: 3 years or 6,000 hours on the projector, and 3 years or 20,000 hours on the laser light engine, whichever occurs first.
